LeadingTouch 5-Wire Resistive Touch Screen
We supply Touch Screen SAW Controller Card with good quality, competitive price and excellent after-sale service.
LeadingTouch 4030S 4 Wire Resistive Touch Series RS232 Controller, the newest controller supplied by Leadingtouch, is designed for 4 Wire resistive , can support full serials of 4 Wire resistive touch product.
4030S providing Serial(RS-232) interface with many superior advantages such as stable performance and fast reaction.
Model | 4030S |
Construction | Four-layer surface-mount design with internal ground plane for EMI suppression. |
Dimensions | Total width: 0.79 inches (20 mm), including connectors |
Total length: 3 inches (76 mm) | |
Total height: 0.47 inches (11.8 mm) | |
Supply Voltage | +5 VDC, nominal (+4.75 to +5.25V DC), and Current 50mA typical, 240mA maximum at +5 VDC. |
Typical power dissipation is 500mW at 5V. Minimum power-supply 400 mA | |
Serial Interface | EIA 232E (Serial RS-232), DCE configuration. 9600 Baud Rate, 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex |
Operating Modes | Leadingtouch protocol |
Customer specific protocol | |
Initial/ Stream/ Untouch Modes | |
Touch Resolution | 4096x4096, size independent |
Conversion Time | Approximately 10 ms per coordinate set |
Reliability | MTBF greater than 1,543,000 hours per MIL-HDBK-217-F2 |
Temperature | Operating: 0°C to 65°C; Storage: -25°C to 85°C |
Humidity | Operating: 10% to 90% RH, noncondensing; Storage: 10% to 90% RH, noncondensing |
Operating Altitude | 10,000 feet |
Shock and Vibration | With Leadingtouch standard container, meet International Safe Transit Association project 2A test procedure. |
ESD: | Per EN 6100-4-2 1995. Level 4, Contact Discharge - 8kV ; Air Discharge - 15kV positive and negative polarity |
Flammability | 94V0 |
LED Indicators | The 4030S controller has one LED status indicators. When 4030S controller initially connects to host, the LED will be constantly on. When touchscreen connects to 4030S, the LED will snuff out after 3 seconds and be constantly on during touch. |
Agency Approvals | The touch system including 4030S controller, touchscreen and connection cable has certified with FCC Part 15. The touch system including 4030S controller, touchscreen and connection cable is compatible with EN55022 and EN55024 standards and is certified with CE |